manualshive.com logo in svg

Elan EL-4KPM-VIP-TX, User Manual, Page: 56 / 75

Share
Download
Elan EL-4KPM-VIP-TX User Manual Download Page 56

56

contact

 [email protected]

EL-4KPM-VIP-CTRL/TX/RX

  

USER MANUAL

Specifications

Package Contents

EL-4KPM-VIP-TX

•  Video input: 1x HDMI type A, female
•  Video output: 1x LAN RJ45 connector
•  Audio input:1x 3.5mm L/R analogue audio
•  Ethernet port: 1x LAN RJ45 connector 
•  RS-232 serial port: 1x 3-pin phoenix connector
•  IR input: 1x 3.5mm stereo jack
•  IR output: 1x 3.5mm mono jack
•  Mounting kit included
•  Dimensions (W x D x H ): 190mm x 108mm x 25mm 
•  Shipping weight (Kit): 0.75kg
•  Operating temperature: 32°F to 104°F (0°C to 40°C)
•  Storage temperature: -4°F to 140°F (-20°C to 60°C)

EL-4KPM-VIP-TX

•  1x EL-4KPM-VIP-TX
•  1x Mounting kit for EL-4KPM-VIP-TX
•  1x 5v-to-12v IR converter cable
•  1x 5v IR Receiver
•  1x 5v IR Transmitter
•  1 x Serial 3-pin phoenix connector

Maintenance

EL-4KPM-VIP-RX

•  1x EL-4KPM-VIP-RX
•  1x Mounting kit for EL-4KPM-VIP-RX
•  1x 5v-to-12v IR converter cable
•  1x 5v IR Receiver
•  1x 5v IR Transmitter
•  1 x Serial 3-pin phoenix connector

EL-4KPM-VIP-RX

•  Video input: 1x LAN RJ45 connector,
•  Video output: 1x HDMI type A, female
•  Audio output: 2x RCA L/R analogue audio
•  Ethernet port: 1x LAN RJ45 connector (video extension)
•  RS-232 serial port: 1x 3-pin phoenix connector
•  IR input: 1x 3.5mm stereo jack
•  IR output: 1x 3.5mm mono jack
•  Mounting kit included
•  Dimensions (W x D x H ): 190mm x 108mm x 25mm 
•  Shipping weight (Kit): 0.75kg
•  Operating temperature: 32°F to 104°F (0°C to 40°C)
•  Storage temperature: -4°F to 140°F (-20°C to 60°C)

Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner or benzene to clean this unit.

EL-4KPM-VIP-CTRL

•  Ethernet port: 2x LAN RJ45 connector 
•  RS-232 serial port: 1x 3-pin phoenix connector
•  IR input: 1x 3.5mm stereo jack
•  Dimensions (W x D x H ): 89mm x 85mm x 23mm  

•  Shipping weight (Kit): 0.4kg
•  Operating temperature: 32°F to 104°F (0°C to 40°C)
•  Storage temperature: -4°F to 140°F (-20°C to 60°C)

EL-4KPM-VIP-CTRL

•  1x EL-4KPM-VIP-CTRL

•  1x 5v-to-12v IR converter cable 

•  1x Serial 3-pin phoenix connector

Summary of Contents for EL-4KPM-VIP-TX












































































Reviews:

No comments