4
• Housing - Aluminum anodized finshing & powder
painting
• Glass–Tempered glass.T=3mm
• Lens – Optical lens, efficiency ≥ 85%
• Gasket – Tooling shaped seal
• Power Cable: H05RN-F x 0,5mm
2
L=2m (for RGB)
• LED: TO type power LED for RGB
• Driver: Constant current output
• The three polarity wires represent the three colours of red, green, blue which feed the current for the individual
driver of fitting, and control the colour changing program.
• Make sure the wires of each fitting that represent the colour are connected in a same circuit, otherwise it can’t
create synchronous colour changing.
• The connection quantity can’t exceed the maximum load of the power supply. The recommended distance be-
tween fitting and colour changing controller is less than 20m. The length of the RJ45 signal wire between the main
controller and the expander should be less than 50m.
3. Specifications
3.1: Material Specifications
3.2 Electrical Parameters
RGB: product circuit (5 cable)
B3AB0106
B3AM0106
Light Source
1×3W RGB 3in1 Full color
1×3W RGB 3in1 Full color
Lens
B49
B49
Recommended selected lens degree
30
30
Input voltage (v)
24VDC
24VDC
Typical Operating Current (mA)
R = 70 | G=70 | B=70
R = 70 | G=70 | B=70
Typical Consumption
5
5
Typical luminance (lm)
50
50
IK rate
02
02
