User Guide
Product: Evolis
Document REF: MIU-5100-C_Evolis Solution GB elancity
Page
11
/
42
Date: 02/09/2020
Confidential document, property of ELANCITY. All copies and transfers are unauthorized without prior consent.
4.2
F
IX YOUR DEVICE SECURELY
Note: When moving, installing or de-installing the sign,
always remove the batteries first
.
This significantly reduces the weight of the device as well as the risk of stress related cracking.
For safety reasons, it is highly recommended to install the radar sign using a scissor lift or
small scaffolding.
1. Attach the (furnished) mounting-bar to the designated post/pole with the aid of fixing
collars/jubilee clips without overtightening them at this stage. Make sure the end that
is stamped ‘TOP’ does indeed get attached at the top.
1) Attach the main body of the radar sign (with batteries removed) by sliding the hooks of
the sign onto the mounting-bar.
2) Adjust the radar sign's position/height and then fully tighten the fixing collars.
3) The radar sign can be further secured to the mounting bar with the aid of a padlock
(padlock is not furnished but there is an ‘eye-hole’ built into the structure for this
purpose : Recommended padlock clasp diameter : 6mm
4) Install the batteries, and / or connect the sign with mains electricity or street lights.
4.3
A
LWAYS MAKE SAFETY A PRIORITY
-
CHECK and COMPLY with current regulations concerning working at a height.
-
CHECK and COMPLY with local regulations regarding traffic and road sign installation
-
VERIFY that the designated pole is stable and has a sufficient diameter.
76mm min. diameter for AC models, 90mm min diameter for Solar models ; the ideal
is 110-120mm).
If in doubt, consult our sales or customer service representatives.
-
If your installation involves connections to mains electricity either directly or through
street lighting, ensure you CHECK and COMPLY with local regulations.
For solar-powered radar signs, the first step is to install the solar panel to the
pole/lamp-post. (using the furnished solar mounting kit). Then procede to the
installation of the radar sign. (See the Solar-power user guide)
