User Manual
Revision 0
2021-03-03
© 2021 Escape Logger
Page 29 of 35
Step Instructions
1
Download and install the ST Microelectronics DfuSeDemo software from the
following link:
https://www.st.com/en/development-tools/stsw-stm32080.html
2
Start the ST Microelectronics DfuSeDemo software which should show a GUI as
follows:
3
Apply power via USB from the PC with the DfuSe Demo software to the Escape
Logger.
4
Using a pen or paperclip press and hold the switch which is located behind the
hole to the left of the “POWER” terminal and then press and release the “RST”
(Reset) button:
