8
Arming with sector key + OK
The option
Activate fast arming
in BrowserOne has to
be activated.
– Press sector key of the sector to be armed (the sector can
be armed if it is authorised at least to one user). The key
will start blinking.
Sect S1.A1
(OK = Arm)
FAST ARMING?
– Press
OK
to confirm (if not, the procedure will be can-
celled after 5s).
– If an exit time has been set, leave the protected areas
within the set time.
When during the procedure another sector key is pressed,
the sector to be armed will be changed.
The procedure will be cancelled if you press the key of a
sector that cannot be armed.
Arming with double pressure
The option
"Fast arming/output manoeuvre" has to
enabled with the double pressure of the sector key
in BrowserOne.
– Press sector key of the sector to be armed (the sector can
be armed if it is authorised at least to one user). The key
will start blinking.
Sect S1.A1
(OK = Arm)
FAST ARMING?
– Press the key again.
– If an exit time has been set, leave the protected areas
within the set time.
The procedure will be cancelled if you press the key of a
sector that cannot be armed.
2.4.6 Fast arming - 8/16 sectors per area mode
Fast arming option can be enabled under ‘8/16 sectors per
area’ mode (if checked during system configuration); to do
so, press sector key + OK, or press sector key twice (as ex-
plained in the previous paragraph 2.4.5
p. 7.
Sectors associated to that sectors key will be armed as long
as they are also authorised for the user.
2.4.7 Disarming
When system is armed:
U
U
U
U
U
U
(default: 111111)
FRI
21,4°
+21,7°
01/06/18
09:00
S1 S2 S3 S4
Area 1
FRI
21,4°
+21,7°
01/06/18
09:00
Disarmed
Area 1
– Key in user code.
– Press
OK
.
System disarming will be marked by beeping sounds.
Only sectors authorised for the specific user will be disarmed.
2.4.8 Disarming with duress mode.
A duress event occurs when a user is forced to disarm the
system at keypad.
In such case:
– Key in user code increasing or decreasing the last digit by
one unit (example: 123450 or 123458 when the real code
is 123459).
– Press
OK
.
The control unit will be disarmed and, at the same time, a
"duress event" will be generated. The event will be man-
aged via phone dialler or GSM module.
2.4.9 Panic alarm from keypad
If necessary, it is possible to generate a "panic alarm", indi-
cating the keypad at which it has been signalled.
*
#
+
– Press keys * and # on keypad simultaneously.
2.4.10 Arming advanced functions
Authorise system arm / disarm
During system configuration, the installer can set arm/dis-
arm authorisation for each user on
Users
menu page in
BrowserOne.
A user can be denied authorisation for arming or disarming