EL.MO. Spa TA1002, User Manual

Page: 2 / 8

2
YELLOW - fault/anomaly indication
RED - alarm/pre-alarm indication
White - setup indication
Fault (or alarm) indications include, at the bottom right, the
number of the displayed fault (or alarm) and the total num-
ber of faults (or alarms) detected by the control panel.
Example: 001/003 = fault (or alarm) 1 of 3.
The alarmed display shows also, at the bottom left, the num-
ber of the last alarm occurred.
If alarms and faults occur simultaneously, the faults window
will be hidden.
After 10 seconds in idle mode, the window with faults will
hide.
4.1 LeD indicators meaning
LED name Colour Indication
230V Green 230V power ON
Silencing Yellow Bells silenced
Pre-alarm Red Alarm + pre-alarm check in progress
Investigation Yellow Acknowledgement / Investigation timer
ongoing
Day/night Yellow Day/night mode active
LED name Colour ON Blinking
Alarm Red Ongoing alarm events
with silenced bell
Ongoing alarm
events
GSM ON Red Telephone dialler ON Waiting for
confirmation
Disablement Yellow Some elements are
disabled
Test Yellow Some system
elements are being
tested
General fault Yellow Ongoing fault events
with silenced buzzer
Ongoing fault
events
System fault Yellow CPU fault with silenced
buzzer
CPU fault
Bells fault/disabled Yellow Bells disabled BELLS fault
GSM fault/disabled Yellow GSM disabled GSM fault
4.2 Buttons function
Key Name
Level 1 function Level 2 function
Enter
--- Enters the selected menu.
Confirms data.
Up (↑)
Displays previous event. Moves the selection upwards.
Changes a field value (hold it
pressed for a faster effect).
Down (↓)
Displays the following event. Moves the selection
downwards.
Changes a field value (hold it
pressed for a faster effect).
Escape (ESC)
In case of fault and alarm
events, it displays fault events
or goes back to alarm events.
Goes back to previous menu.
Cancels the operation.
Evacuate
During acknowledgement/
investigation (day mode), it
resets delay timers and sets
the panel to alarm condition.
Evacuation procedure: it
generates the Evacuate
event and sets the panel to
alarm condition.
During acknowledgement/
investigation, see level 1.
Silencing
Silences the buzzer. Silences/activates bells.
Switches from
Acknowledgement to
Investigation.
Reset
--- Reset procedure: it resets
the panel when it is in alarm
or fault condition.
Day/night
--- Enables/disables the day/
night mode.
5 MeNU MAP
• Disablements
• Zone
• Zones list (0-44)