Page 6 of 19
User Manual ECC-Opto-Std – Release 2.62
2 Features
2- and 3-electrode cell with optical window for aprotic electrochemistry.
Materials in media contact are stainless steel 1.4404, PEEK and EPDM
The backside of the working electrode material can be observed through the
optical window on top. Inspection area diameter is 1 mm. Other diameters up to
10 mm available.
Typically used in combination with optical or Raman microscopy in the reflection
mode. X-ray option with Beryllium window available.
The window is made of optical glass. Sapphire, Beryllium and Kapton
®
windows
are available on request.
Working electrodes can be single crystals or grains, powder samples and free-
standing electrodes (applied onto current collector mesh). Maximum electrode
diameter is 10 mm.
Easy and clean electrolyte filling via the vacuum (syringe) method.
All necessary equipment is included.
Cell assembly and filling are to be carried out inside a glove box. Once sealed, the
cell may be operated outside the box at ambient atmosphere.
Small and defined electrolyte volume down to 0.1 cm
3
due to minimized dead
volume
Connection to potentiostat/battery tester via 2 mm banana sockets, adapters for 4
mm banana sockets are included
Temperature operation range -20 to +70 °C
Dimensions of the ECC-Opto-Std (mm):
