ekwb EK-MLC PHOENIX Series, User Manual, Page: 25 / 40

/ 23 /
STEP 2:
Disconnect the QDC installed on the EK-MLC Phoe-
nix with QDC. First you need to press on the button on
the QDC to release (disconnect) the mechanism which
holds it together. After that you should gently pull it apart
and you are done.
STEP 3:
Install the QDC enabled pre-filled water block onto your
graphics card or CPU as per installation manual (which
came with the water block) and install it into your PCI-
express expansion slot on your computer.
STEP 4:
Route the tubes in the way that the QDC’s can be con-
nected with the present ones on the EK-MLC Phoenix.
The tubes should be long enough to do so.
STEP 5:
Connect the QDC couplings according to the sketch
on the right. You will feel the locking click sound when
assembled correctly.
STEP 3 and 4
Female QDC
Male QDC
STEP 5