ekwb EK-MLC PHOENIX Series, User Manual, Page: 21 / 40

/ 19 /
AM4 SOCKET MOTHERBOARDS
STEP 1
Install mounting AMD bracket add-on over the Intel mounting
plate. Use Philips screw driver to tighten four M4x5 DIN7985
screws to secure it.
Please note the orientation of the add-on brackets. It is manda-
tory to install them with raised side facing towards copper base.
STEP 2
If already installed, please remove the motherboard from your
computer and place it on an even surface with front facing up.
STEP 3
Removing of the original plastic hold-down clamps and
the factory backplate:
Using Philips-head screwdriver remove the four UNC 6-32
screws securing the original plastic hold-down clamps around
the socket as shown on the sketch. Remove the original
AMD® backplate and the hold-down clamps and store them
away. See sketch for further part identification.
STEP 1 STEP 2
STEP 3
AMD® factory backplate
UNC 6-32
Screws
Hold-down
clamps