EN
If you have water block with
changeable mounting plate take the
allen key and take next step.
EN
Unscrew four M4 screws with allen
key.
EN
Replace Intel Mounting plate with
AMD mounting plate.
D
Anleitung gilt für Kühler mit wechselbarer
Montagehalterung
D
Die vier M4-Schrauben mit dem Inbus-
Schlüssel lösen.
D
Die Intel-Halterung gegen die AMD-Halterung
austauschen.
EN
Screw back all 4 screws. Do not use
high force!
EN
EK Universal backplate parts
D
Die vier M4-Schrauben wieder einschrauben.
D
Benötigte Teile der Universal-Backplate
EN
Unscrew stock retention plate
screws
EN
Remove stock retention plate and
backplate
EN
Prepare EK UNI Backplate with CPU
mounting screws
D
Die Schrauben an der vorhandenen
Halterung entfernen.
D
Vorhandene Halterung und Backplate
entfernen.
D
M4-Schrauben an der EK UNI-Backplate
anbringen.
EN
Place backplate with CPU screws
into CPU socket holes
EN
Place PVC washer, metal washer and
M4 nut on CPU mounting screw
EN
Screw the mounting CPU mounting
screw while holding M4 nut
D
UNI-Backplate zusammen mit den Schrauben
von der Rückseite des Mainboards anbringen.
D
Von der Vorderseite Plastik-Unterlegscheiben,
Metall-Unterlegscheiben und Muttern an den
Schrauben anbringen.
D
Die Muttern von vorne halten und von der
Rückseite her festschrauben.
1
This step is only obligatory when installing the water block on the AMD AM2/AM2+/AM3/AM3+ mother board.
Dieser Schritt ist notwendig nur wenn Sie den Wasser-Block auf eine AMD AM2/AM2+/AM3/AM3+ Hauptplatine montieren.
AMD
Mounting
plate
Intel
Mounting
plate
Allen key