- 18 -
SCHRITT 9: PUMPENANSCHLUSSKABEL
D-RGB
Anschluss
VDG Anschluss
4-poliger Anschluss
Schritt A:
Verbinden Sie den 4-poligen PWM-Stecker der
Pumpe mit der Hauptplatine.
Verwenden Sie nicht den gleichen HUB, mit
dem die Lüfter verbunden sind - die Drehzahl
(RPM) des Lüfters und der Pumpe müssen
separat geregelt werden.
D-RGB Kopf
RGB Kopf
Schritt B:
Stecken Sie den 3-poligen Anschluss der D-RGB-
LED-Leuchte der Pumpe an den D-RGB-KOPF
auf der Hauptplatine oder an einen der D-RGB
(Adressierbaren RGB) Köpfe auf dem HUB.
Die LEDs funktionieren, wenn die
Steckerbelegung auf dem Anschluss wie folgt
ist:
+5V, Daten, Leer, Masse
. Bei einigen
Hauptplatinen können Sie alternativ einen VDG-
Anschluss anstelle des D-RGB verwenden, um
die LEDs anzuschließen.
Es muss sichergestellt werden, dass
der auf dem Anschluss angegebene
Pfeil an die auf dem Motherboard an-
ge 5V-Leitung angeschlos-
sen wird. Wird eine LED-Diode an
den 12V-RGB-KOPF angeschlossen,
können die LEDs beschädigt werden.
Der Anschluss ist bei der D-RGB- und
RGB-Version identisch, die D-RGB-
Version verfügt jedoch über 3 Kabel
vom Anschluss zur Leiterplatte. Die
RGB-Version verfügt über 4 Kabel.
Wenn D-RGB an einen normalen
RGB-Kopf angeschlossen wird,
könnte das Motherboard oder der
LED-Streifen beschädigt werden.
SCHRITT 8: EINBAU DER LÜFTER-
BAUGRUPPE UND DES KÜHLERS IN
EIN PC-GEHÄUSE
EK-AIO Elite 360 D-RGB / EK-AIO Elite 280
D-RGB
Option 1
Verwenden Sie die UNC 6-32 x 34 mm
Schrauben, um das vormontierte Kühler-Lüfter-
Setup mit den restlichen drei / zwei Lüftern
(insgesamt sind es dann sechs / vier Lüfter) am
PC-Gehäuse zu befestigen.
Die Ausrichtung der Lüfter ist entscheidend, um
die beste Leistung des Heizkörpers zu erzielen.
Installieren Sie die Lüfter so, dass die Luft
durch den Heizkörper geleitet wird. Damit die
Ausrichtung des Lüfters korrekt ist, beziehen Sie
sich auf die Position des EK-Logos auf der Seite
des Lüfters. Es muss auf die gleiche Weise am
unteren und oberen Lüftersatz ausgerichtet sein.
Es wird außerdem empfohlen, dass die Kabel aller
Lüfter für ein einfacheres Kabelmanagement in
die gleiche Richtung verlaufen.
Option 2
Wenn nicht genügend Platz in Ihrem PC-
Gehäuse vorhanden ist, um alle sechs / vier
Lüfter auf dem Kühler zu platzieren, können Sie
die restlichen drei / zwei an einer anderen Stelle
in Ihrem PC positionieren.
Verwenden Sie in diesem Fall die UNC 6-32 x 6
mm Schrauben, um den vormontierten Kühler
und die Lüfter am PC-Gehäuse zu befestigen.
UNC 6-32 x 34 mm
(12x / 8x)
EK-AIO Elite 360 D-RGB / EK-AIO Elite 280 D-RGB
D-RGB-Kopf zur
Hauptplatine (1x)
PWM Kopf zur
Hauptplatine (1x)
(4-poliger roter PWM-Kopf)
4-poliger PWM-Kopf (7x)
D-RGB Kopf (7x)
HUB
SATA
Summary of Contents for EK-AIO Elite 280 D-RGB
