- 19 -
Non-abrasive
cloth
IHS
STEP 3
STEP 3
Wipe the IHS clean using a non-abrasive cloth or Q-tip as shown in
the illustration. Once clean apply a line of Thermal Compound on one
edge of the IHS and use a credit card or similar to spread it evenly.
The layer of Thermal Compound must be thin and even in thickness
over the entire surface of the IHS. Excessive or irregular application
may lead to poor performance! This method applies for Thermal
Grizzly Hydronaut Thermal Compound as supplied with all
Magnitude CPU Water Blocks.
STEP 4
Remove the protective sticker
and position the CPU Water Block
onto the Standoffs. To achieve optimal performance mount the CPU
Water Block in one of the orientations prescribed on page 13.
STEP 4
Water Block
