36
5
、
CURTIS Hand held unit
Precautions for operation:
The attention function of the hand-held unit is to facilitate vehicle inspection and maintenance. It is not
allowed to adjust the controller parameters without the approval of the vehicle manufacturer, so as to
avoid vehicle and personal safety accidents.
The hand-held unit will automatically save the modification parameters, just need to close the key switch,
restart.
The CURTIS hand held unit can be connected in the event of a controller power or power failure
Vehicle fault reading process:
1. After connecting the hand held unit with the controller, open the key switch
2, From the menu list of CURTIS hand held units, find: Faults...
3. When the vehicle is running and the hand-held cursor flashes, there will be English fault content,
which can be interpreted by referring to the fault code table
Vehicle signal detection:
1. After connecting the hand held unit with the controller, open the key switch
2, According to the menu list of CURTIS hand held unit, find: Monitor......
3. According to requirements, open the corresponding sub-item of the detection menu, run the vehicle,
and observe the change of the hand-held value.
CURTIS Contents of hand held unit menu:
The Curtis 1313 hand held programmer is used to configure the Curtis electric control system. Through
this programmer, you can adjust and save the set parameters, real-time monitoring of controller data and
