15
Installation:
When repairing or replacing hydraulic components, electric and electronic components, make sure to
install them back to their original positions.
Wheels:
Quality of the wheels has significant effect on stability and driving performance of the stacker. Modification
on wheels can be performed only with the approval from the manufacturer. When replacing wheels, ensure that the
stacker is levelled as delivery state (wheels must be replaced in pairs, i.e. replace right wheel together with left one).
Lifting chain and rollers:
Chain and rollers will be worn quickly without good lubrication. Perform periodic
lubrication according to following maintenance table. Shorten the lubrication period under adverse operation
conditions (such as in dusty and hot environment).
Hydraulic oil pipe:
The oil pipe must be changed every 6 years. When change the hydraulic assembled parts, the oil
pipe should be also changed.
9.2 Daily Maintenance
9.2.1 Check every pole, every cable and their covers.
9.2.2Check if the accumulator box is secured.
9.2.3 Check the stacker for oil leakage.
9.2.4 Check the chain, rollers, fork, oil pipes and horn.
9.2.5Check the brake.
9.2.6 Check the wear and tear of drive wheels and loading wheels.
9.3 Professional Maintenance Manual
It is very important for safe operation of the truck to perform overall professional maintenance. Failure in
performing maintenance according to specified interval may cause malfunction of the truck, and potential risk to
human and equipment.
Maintenance periods listed in this manual apply to single shift a day under normal operation conditions. If using
in dusty environment, the ambient temperature varies remarkably or in multi-shift situation, the maintenance
period has to be shortened.
Maintain the truck according to following maintenance list. Maintenance periods are as follows:
W1 = Every 50 work hours, but at least once a week.
M3 = Every 500 work hours, but at least once every three months
M6 = Every 1000 work hours, but at least once every six months
M12 = Every 2000 work hours, but at least once every 12 months
Summary of Contents for EB18E
Page 6: ...5 EB20E ...
Page 12: ...11 6 Electrical schematic diagram ...
