14
8.5 Handling stacking operation
1). How to transport the goods pile on weight
Will forklift drive to the front of the items which need to carry slowly , make fork parallel to the ground, lifting the
fork to height, it can be inserted into the freight insert goods fork and move forward slowly, when the goods
completely inserted into the goods after parking and stepping on the brakes, manipulating ascend handle, the heavy
lifting to a certain height, make the door frame lean back, slowly astern, don't touch the adjacent goods, when weight
completely left the heap of goods, reduce the goods to the right position, then walk for handling.
2). The weight on the heap of goods
Will weight low, lean back door frame, to storage goods moving close to the pile of deceleration, when determining
forklift with pile goods into a linear state, stepping on the brakes slowly adjust the door frame Angle to the vertical
state, increase the weight will be slightly more than goods pile height, and then slowly driving forklift driving
forward to pile top stop. Heap controls control lever slowly, once handling stacked drags the weight, the goods fork
to the hollow position, from the weight of the goods fork, make sure barrier-free backward position, can retreat.
After goods fork out weight reduce goods fork, door frame round of the reentry after handling operation.
9.Maintenance
The parts on the vehicle, especially safety devices, shall not be modified without permission, and the driving speed of
the vehicle shall not be changed. All parts supplied by the original manufacturer are subject to strict quality
inspection. To ensure the safety and reliability of the vehicle, please use the original accessories. Replacement parts,
including all oil, must be collected and processed in accordance with local environmental and health laws and
regulations.
9.1Safety procedures for repair and maintenance
Maintenance technician:
The maintenance and service should only be performed by special personnel trained by
the manufacturer. After the technician sent by after-sales department of the manufacturer completed maintenance
and servicing work, they should sign on the service log.
Cleaning Operation:
Flammable liquid cannot be used for cleaning the stacker. Before cleaning, take safety
precautions to prevent electric sparks (e.g. sparks caused by short circuit). When operating the accumulator,
connectors on it must be disconnected. Use soft air suction or compressed air, non-conductive and anti-static
brushes to clean electric and electronic components.
Operation of Electric System:
Operation on the electric system should only be performed by specially trained
personnel. Before performing any operation on the electric system, precautions must be made to prevent electric
shock. When operating the accumulator, connectors on it must be disconnected.
Summary of Contents for EB18E
Page 6: ...5 EB20E ...
Page 12: ...11 6 Electrical schematic diagram ...
