PC4-PRESTO • CompactPCI
®
PlusIO • 4
th
Generation Intel
®
Core™-4xxx Processor
Feature Summary
On-Board Building Blocks
<
Additional on-board controllers, PCIe
®
based
<
3 x Gigabit Ethernet controllers Intel
®
I210IT
<
1 x Gigabit Ethernet PHY Intel
®
I217LM
<
PCIe
®
to PCI
®
Bridge PLX 8112
<
PCIe
®
Gen2 packet switch PLX 8608
<
SATA 3G/6G* RAID controller Marvell
®
88SE9230, ARM powered subsystem for host CPU offload
* Marvell SATA RAID controller setup for 3Gbps by default - please refer to the PC4-PRESTO User Guide
Security
<
Trusted Platform Module
<
TPM 2.0 for highest level of certified platform protection
<
Infineon Optiga™ SLB 9665 cryptographic processor
<
Conforming to TCG 2.0 specification
<
AES hardware acceleration support by 4
th
Gen processor 4xxx series (Intel
®
AES-NI)
Front Panel I/O (4HP)
<
2 x Gigabit Ethernet RJ45 (1 = PCH & I217LM - iAMT, 2 = I210IT)
<
2 x DisplayPort (from processor integrated HD graphics engine, mDP style receptacles, optional cable
connector retainer available)
<
2 x USB 3.0
CompactPCI
®
& CompactPCI
®
PlusIO Backplane Resources
<
PICMG
®
CompactPCI
®
2.0 CPU card & system slot controller for J1 based 32-bit PCI
®
systems, 33/66MHz
<
PICMG
®
CompactPCI
®
2.30 J2 UHM connector according to CompactPCI
®
PlusIO
<
J2 can be used to enable CompactPCI
®
Serial peripheral card slots for hybrid systems with a split backplane
<
J2 can be used alternatively for a rear I/O module
<
J2 is assigned to 4 x PCIe Gen2 5GT/s (from PCH), 4 x SATA 3G/6G* (from Marvell SATA hardware RAID
controller), 4 x USB2 ports (from PCH), 2 x Gigabit Ethernet (I210IT networking controllers)
* Marvell SATA RAID controller setup for 3Gbps by default - please refer to the PC4-PRESTO User Guide
© EKF -12- ekf.com
