background image

Technical Information C41-CFAST  •  CFast™ Card  SATA  USB  Mezzanine Module

P-UFD1

As a custom specific option, the C41-CFAST can be provided with one USB SSD (Solid State Drive) low

profile mezzanine module. However, the total stack height of the CPU carrier board and the

C41-CFAST mezzanine module assembly would then exceed the 4HP envelope up to ~ 1.8mm. This

may be tolerable under the condition that there is no 4HP pitch expansion side board mounted, or the

locking screw for the USB Flash module is omitted, or the adjacent side board has no bottom mount

components opposed to the USB SSD.

The UFD1 Flash module cannot be populated together with the J-USB3 receptacle, since both

components would overlap each other. Be sure to discuss your needs with [email protected] before

ordering.

The C41-CFAST USB ports are derived from the ICH southbridge on the CPU carrier board. Self

resettable fuses are provided on the C41-CFAST for short-circuit and overcurrent control regarding the

P-UFD1 pin headers.

P-UFD1 P-UFD2   •   2.00mm Pin Header 2x5 (251.1.0205.20.10)

USB Solid-State Drive (Low Profile) 562.20.0004.00 (4GB)

Sandisk uSSD 5000 • STec SLUFDM • Intel Z-U130 SSDUSMS

+5V  1)

1

2

NC

USB_D-

3

4

NC

USB_D+

5

6

NC

GND

7

8

NC

Mech. Key

9

10

NC

1)

Self resetting fuse 0.5A, power switched according to CPU carrier board sleep state

1

2

9

10

251.1.0205.20.10
© EKF  •  ekf.com

©  EKF                                                                                        -22-                                                                                      ekf.com

Summary of Contents for C41-CFAST





























Reviews: