Technical Information C20-SATA • SATA Dual-Drive Mezzanine Module
Technical Reference - Connectors
Caution
Some of the connectors may provide operating voltage (e.g. +12V, +5V and +3.3V) to devices inside
the system chassis, such as internal peripherals. Not all of these connectors are overcurrent protected.
Do not use these connectors for powering devices external to the computer chassis. A fault in the load
presented by the external devices could cause damage to the board, the interconnecting cable and
the external devices themselves.
Please Note
The C20-SATA mezzanine module may be equipped with several connectors for system internal usage.
Not all of these connectors may be present on a particular board. Be sure to specify your individual
needs when ordering the C20-SATA board. Characteristic features and the pin assignments of each
connector are described on the following pages.
Typical 8HP Assembly Stack with C20-SATA
© EKF -16- ekf.com