en
│
8
Display
Description
Status LED flashes green.
Normal mode.
The sent packets can be decrypted.
Status LED flashes red.
Incorrect connection.
The sent packets cannot be
decrypted.
Status LED lights up red.
Software error/update required.
The lower status LED flashes red
briefly.
Converter is starting/reset to default
settings was carried out.
Link/activity LED off.
No network connection.
Link/activity LED flashing.
Network activities.
Link/activity LED on.
Network connection enabled.
10/100 LED off.
LAN speed 10 Mb.
10/100 LED on.
LAN speed 100 Mb.
Table 2: Visual signals of
ekey home CV LAN RS-485
4.6.3
Default settings
The LAN RS-485 converter comes with the following default settings.
ekey converter LAN RS-485
IP address
192.168.1.250
Network mask
255.255.255.0
Network gateway
0.0.0.0
Receiver port
56000
Receiver IP address
0.0.0.0
Spacer
_
Protocol type
rare
Communication type
data transmission only
Table 3: Default settings of
ekey home CV LAN RS-485
