www.rkdoorsystems.co.uk
Page 17
en│17
Step
Action
Description
Display
3.
Enter the user code
to be deleted on the
keypad.
-
-
4.
Press
.
The status LEDs
light up green.
The status LEDs
light up red.
The user code is not
known. The user code
was not deleted.
Enter the admin code
from the beginning
again.
-
-
5.
No action
required.
-
Status LEDs are
off.
The user code was deleted. The system is in normal mode.
You can reset the system to its default settings either via the code pad or
using the control panel. Use whichever device is most easily accessible.
The code pad is reset to its default settings. All user codes will be
irrecoverably deleted. The admin code is reset to the default setting
9999
, the relay switching time to 3 seconds, the brightness threshold to
10% and the brightness value to 100%. The acoustic and optical
signalling that indicates when a button has been pressed, and the acoustic
signal for door opening, are both switched on. If the settings are reset via
the control panel, the coupling between the control panel and code pad is
disconnected.
Via the code pad
Settings are reset to the default via the admin menu. To get to the admin
menu, enter the admin code.
See Entering the admin code, page 8.
The system is in the admin menu.
Step
Action
Description
Display
1.
Press
4
.
The status LED
lights up green
on the left.
2.
Press
.
The status LEDs
light up red.
3.
Enter the admin code
on the keypad.
-
-
Resetting the
system to
default
settings
