www.rkdoorsystems.co.uk
Page 12
12│en
The system is in the admin menu.
Step
Action
Description
Display
1.
Press
5
,
2
and the
number
of the
required mode.
The status LED
lights up green
on the left.
2.
Press
.
The status LEDs
light up green.
The status LEDs
light up red.
Something has been
entered incorrectly.
The brightness was
not changed. Enter
the admin code from
the beginning again.
-
-
3.
No action
required.
-
Status LEDs are
off.
The back-illumination brightness has been set. The system is in normal
mode.
The switching time for the relay can be set up to 99.9 in 0.1-second
increments. By default, the switching time is set to 3 seconds. Enter the
required relay switching time in tenths of a second. E.g.:
60
for 6 s;
100
for 10 s;
300
for 30 s.
The relay switching time is set via the admin menu. To get to the admin
menu, enter the admin code.
See Entering the admin code, page 8.
The system is in the admin menu.
Step
Action
Description
Display
1.
Press
5
,
3
and the
value
of the required
relay switching time.
E.g.
1
,
0
,
0
for 10 s.
The status LED
lights up green
on the left.
2.
Press
.
The status LEDs
light up green.
The status LEDs
light up red.
Setting the
relay
switching time
