www.rkdoorsystems.co.uk
Page 11
en│11
The brightness threshold for switching on the automatic back-illumination
can be set using percentage values. By default, the brightness threshold
is set to 10%. Enter the required percentage value:
□
0
= automatic back-illumination off;
□
1
to
100
= brightness threshold settings between highly
sensitive and highly insensitive.
The automatic back-illumination is set via the admin menu. To get to the
admin menu, enter the admin code.
See Entering the admin code, page 8.
The system is in the admin menu.
Step
Action
Description
Display
1.
Press
5
,
1
and the
value
of the required
brightness threshold.
E.g.
7
,
0
for 70%.
The status LED
lights up green
on the left.
2.
Press
.
The status LEDs
light up green.
The status LEDs
light up red.
Something has been
entered incorrectly.
The brightness
threshold was not
changed. Enter the
admin code from the
beginning again.
-
-
3.
No action
required.
-
Status LEDs are
off.
The automatic back-illumination has been set. The system is in normal
mode.
The brightness of the back-illumination can be set using 4 predefined
modes. By default, the back-illumination is set to 100%. Enter the
number of the required mode:
□
0
= back-illumination off;
□
1
= back-illumination at 33%;
□
2
= back-illumination at 66%;
□
3
= back-illumination at 100%
The back-illumination brightness is set via the admin menu. To get to the
admin menu, enter the admin code.
See Entering the admin code, page 8.
Setting the
automatic
back-
illumination
Setting the
brightness of
the back-
illumination
