eKey home CP micro plus, Operating Instructions Manual

Page: 34 / 37

Resetting the system to default settings en │ 33
Via the digital input
The process of resetting to the default settings is initiated via the digital input. The
finger scanner settings are reset to their defaults. All user and administrator fingers
will be irrecoverably deleted. The coupling code for the app is reset to the default
setting of
9999 .
Step Instruction
1st Disconnect the ekey home CP micro plus from the mains supply.
2nd Press and hold the request-to-exit button or short-circuit the pins for
the digital input and keep them in this state.
3rd Connect the ekey home CP micro plus to the mains supply.
4th Keep the request-to-exit button held down or keep the pins for the
digital input short-circuited for at least 5 s.
5th Release the request-to-exit button or remove the short-circuit. Within
5 s, press and hold the request-to-exit button or short-circuit the pins
for the digital input for at least 500 ms.
✓
The finger scanner and the control panel have been reset to the default settings.
You can now recommission the system.
See “ Configuration of normal mode and usage of the finger scanner with the app ”,
page 16.
See “ Configuration of normal mode and usage of the finger scanner with
administrator fingers ”, page 23.