Configuration of normal mode and usage of the finger scanner with administrator fingers
en
│
25
Step
Action
Description
Display
4th
To store administrator
fingers 2, 3, and 4, carry out
steps 2 and 3 for
administrator fingers 2, 3,
and 4.
The finger
scanner lights
up blue.
✓
All administrator fingers were successfully stored. The system is in normal mode.
NOTICE
Restarting the finger scanner in admin mode:
If, when the finger scanner is
restarted, admin mode is active and fewer than 4 administrator fingers are present,
all previously stored administrator fingers are deleted.
Storing user fingers
The system enables a maximum of 99 user fingers to be stored.
A user finger is any finger which is used for triggering an action on the control panel,
e.g., opening a door. We recommend storing 2 fingers in each case.
The system is in normal mode.
Step
Action
Description
Display
1st
Carry out three Finger
Touches on the sensor within
5 s. This will take you to the
admin menu.
The finger
scanner flashes
green
intermittently
on the left and
right.
2nd
Swipe any administrator
finger over the sensor.
The finger
scanner flashes
green.
The finger
scanner lights
up red.
The administrator finger was
not recognized. Repeat step
1.
-
-
3rd
Carry out a Finger Touch on
the sensor within 5 s.
The finger
scanner lights
up orange.
