17
Dryer malfunction
cannot reach the
desired humidity”.
Excessive humidity in the
cooking chamber
The screen displays
the type of error. The
oven continues
working
Contact a skilled
technician
Wash oven
excessive number of
cooking cycles
executed without
washing the oven
Too many cooking cycles
executed without washing
The screen displays
the type of error. The
oven continues
working
Activate multiple washing
cycles in “Intensive”
mode (L3)
Faulty heating resistors
Excessive time taken to reach
the required temperature
The screen displays
the type of error. The
oven continues
working
without heating the
cooking chamber
Contact a skilled
technician
8. Technical support
Before leaving the factory this appliance has been calibrated and tested by experienced and skilled personnel
in order to obtain the best operating results. Any repair or calibration must be carried out with the utmost
care and attention, using only original parts.
That is why it is always necessary to contact the Dealer who sold the appliance or our nearest Technical
Support Centre, specifying the kind of failure and what model you have. For servicing needs the user may
contact Tecnoeka on the numbers shown on the cover, or refer to the website www.tecnoeka.com.
9. Information to users
Pursuant to Directive 2012/19/EU the crossed out wheelie bin symbol on the
appliance indicates that the product must be collected separately from other waste
at the end of its service life. At the end of the appliance’s service life, the user
must, therefore, deliver it to the appropriate centres for the separate collection of
electrical and electronic waste.
Separate waste collection and subsequent treatment, recovery and disposal, are conducive to the
production of equipment with recycled materials and reduce the negative effects on the environment
and health possibly caused by incorrect waste handling.
The illegal disposal of the product by the user involves the application of administrative sanctions referred
to in Article 50 and following of Legislative Decree no. 22/1997.
10.Established warranty
Tecnoeka’s products are exclusively designed for food use and are covered by warranty complying
with Legislative Regulation article no. 1490 and following) for professional users such as VAT holder
customers purchasing from a Distributor.
Tecnoeka’s products are professional and certified according to the IEC 60335-1 standards and can
only be sold to professional users.
With the exclusion of any additional warranty, the Seller will repair, at its sole discretion, only those
parts of its products which prove vitiated by an original defect provided that, subject to revocation,
the customer has reported the defect within 12 months from purchase and reported the defect
within 8 (eight) days of the discovery, in writing enclosing a copy of the invoice, receipt or sales
receipt proving the purchase.
Summary of Contents for MILLENIAL MKF 1011 CTS
Page 20: ...19 REV 0 ...
