- 9 -
CONNECTING THE D-RGB LED STRIP
STEP 1
Plug the 3-pin connector of the water block D-RGB LED light into
the D-RGB HEADER on the motherboard. The LED will work if the
pin layout on the header is as follows: +5V, Digital, Empty, Ground.
Please ensure that the arrow indicated on the connector is
plugged into the +5V line as indicated on your motherboard.
If you put the LED Diode to the 12V RGB HEADER you
can damage the LEDs. Failure to do so will damage your
motherboard or LED strip.
STEP 1
D-RGB HEADER
RGB HEADER
FITTINGS AND TUBING
STEP 1
With the EK-Quantum MSI MPG X670E CARBON EK X D-RGB water
block, it is mandatory to use the bottom port as the INLET. Mixing
the ports may result in poor thermal performance of the water
block. Tighten the fittings in a clockwise direction until the gasket
underneath is compressed.
STEP 1
OUTLET
INLET
