8
Notice for this monitor
To Use the Monitor for a Long Time
●
Maintenance
•
The display quality of monitors is affected by the quality level of input signals and the degradation of
the product. Perform visual checks and periodic constancy tests to comply with medical standards /
guidelines according to your application, and carry out calibration as necessary. Use of the RadiCS
monitor quality control software enables you to perform high-level quality control that meets medical
standards / guidelines.
• It takes about 15 minutes for the performance of electrical parts to stabilize. Please wait 15 minutes
or more after the monitor power has been turned on or the monitor has recovered from the power
saving mode, and then adjust the monitor.
• We recommend that monitors be set to the recommended level or lower to reduce changes in
luminosity caused by long-term use and maintain stable brightness.
• Perform correlation using RadiCS/RadiCS LE to adjust the measurement result of the Integrated
Front Sensor to the measurement result of the UX1 sensor for reference. Periodical correlation
enables the measurement accuracy of the Integrated Front Sensor equivalent to that of the UX1
sensor. For details, refer to RadiCS/RadiCS LE User’s Manual.
●
Cleaning
Periodic cleaning is recommended to keep the monitor looking new and to prolong its operation
lifetime.
Gently wipe off any dirt on the cabinet or panel surface with a soft cloth soaked in a small amount of
water or one of the chemicals listed below.
Chemicals that may be used for cleaning
Material name
Product name
Ethanol
Ethanol
Isopropyl alcohol
Isopropyl alcohol
Chlorhexidine
Hibitane
Benzalkonium chloride
Welpas
Alkyldiaminoethylglycine
Tego 51
Glutaral
Cidex Plus28
Attention
•
Do not use chemicals on a frequent basis. Chemicals such as alcohol and antiseptic solution may cause
gloss variation, tarnishing, and fading of the cabinet or panel, and also quality deterioration of the image.
• Never use any thinner, benzene, wax, and abrasive cleaner, which may damage the cabinet or panel.
• Do not let chemicals come into direct contact with the monitor.
Note
• The optional ScreenCleaner is recommended for cleaning the cabinet and panel surface.
To use the monitor comfortably
• Staring at the monitor for a long time tires your eyes. Take a 10-minute rest every hour.
• Look at the screen from a proper distance and from a proper angle.
