17
Chapter 2 Installation / Connection
English
PbyP (dual-screen) display
Attention
•
When using the monitor for PbyP display, you need to configure "Input" in the Setting menu to select a
combination of signals to be displayed. For details, refer to the Installation Manual (on the CD-ROM).
•
When the monitor is used in PbyP mode to display images from two PCs, use of some quality control
features such as calibration may be restricted.
For DisplayPort 1 / DisplayPort 2
For DisplayPort 1 / DVI
Signal cable:
PP300
Signal cable: PP300
Signal cable:
DD300DL
Signal cable: PP300
Note
• When the supplied DisplayPort cable (PP028) is connected to and , the signal input to can be
displayed in PbyP mode. In this case, you need to set “Signal Format” - “DisplayPort 1” - “Version” in the
Setting menu to “1.2”, and “Daisy Chain” to “On”.
• Remove the cap before connecting the cable to and .
Signal cable: PP028
Signal cable: PP300
