background image

 CAUTION

Handle with care when carrying the unit.

Disconnect the power cord and cables when moving the unit. Moving the unit with the power cord or cables 
attached is dangerous and may result in injury.

Carry or place the unit according to the correct specified methods.

 •

When moving the product, hold the bottom of the monitor firmly.

 • Monitors of size 30 inches and above are heavy. When unpacking and/or carrying the monitor, ensure at least two 

people are utilized.

 •

If your device model has a handle on the back of the monitor, grasp and firmly hold the bottom and handle of the 

monitor.

Dropping the unit may result in injury or equipment damage.

     

     

Do not block the ventilation slots on the cabinet.

 • Do not place any objects on the ventilation slots.

 •

Do not install the unit in a place with poor ventilation or inadequate space.

 • Do not use the unit laid down or upside down.

Blocking the ventilation slots prevents proper airflow and may result in fire, electric 
shock, or equipment damage.

Do not touch the plug with wet hands.

Doing so may result in electrical shock.

Use an easily accessible power outlet.

This is to facilitate disconnecting the power in case of a problem.

Periodically clean the area around the power plug and the ventilation slot of the monitor.

Dust, water, or oil on the plug may result in fire.

Unplug the unit before cleaning it.

Cleaning the unit while it is plugged into a power outlet may result in electric shock.

If you plan to leave the unit unused for an extended period of time, disconnect the power cord from 

the wall socket after turning off the power switch for the safety and the power conservation.
Dispose of this product in accordance with the laws of the locality or country of residence.

For users in the territory of the EEA and Switzerland:

Any serious incident that has occurred in relation to the device should be reported to the 

Manufacturer and the Competent Authority of the Member State in which the user and/or patient is 

established.

6

PRECAUTIONS

Summary of Contents for RadiForce RX370

































Reviews: