English
17
Chapter 2 Installation / Connection
PbyP (dual-screen) display
Attention
•
When using the monitor for PbyP display, you need to configure "Input" in the Setting menu to select a
combination of signals to be displayed. For details, refer to the Installation Manual (on the CD-ROM).
• To use One Cable PbyP, connect the cable to . Connectors other than do not support One Cable PbyP.
•
When the monitor is used in PbyP mode to display images from two PCs, use of some quality control
features such as calibration may be restricted.
For DisplayPort 1 / DisplayPort 2
For One Cable PbyP
Signal cable:
PP300-V14
Signal cable: PP300-V14
Signal cable:
PP300-V14
PinP (sub window) display
Signal cable:
HH200PR
Signal cable: PP300-V14
*An example of sub-window display using HDMI
Attention
• To display the sub window, connect the cable to the input connector
or .
• The signals that can be displayed on the sub window vary according to the signals being displayed on the
main screen. For details, refer to the Installation Manual (on the CD-ROM).
