22
Chapter 5 Specifications
Operating
Environmental
Requirements
Temperature:
0˚C to 35˚C (32˚F to 95˚F)
Humidity
20% to 80% R.H. (no condensation)
Air pressure
540 hPa to 1060 hPa
Transportation/
Storage
Environmental
Requirements
Temperature
-20˚C to 60˚C (32˚F to 95˚F)
Humidity
10% to 90% R.H. (no condensation)
Air pressure
200 hPa to 1060 hPa
5-2. Main Default Settings
CAL Switch Mode: The factory default display setting is DICOM mode.
Mode
Brightness
Gamma value
1-DICOM
600 cd/m
2
DICOM
2-CAL1
500 cd/m
2
DICOM
3-CAL2
400 cd/m
2
DICOM
Others
Auto Input Detection
Off
Power Save
High
Indicator
4
Presence Sensor
Off
Languages
English
On-Screen Logo
*1
Off
Image Rotation
*1
Portrait
DDC
*1
Auto
DC5V Output
*1
Off
DP Power Save
*1
Off
Grayscale Warning
*1
On
Sharpness Recovery
*1
On
Sub Pixel Drive
*1,*2
Off
Preferred Refresh Rate
*1
Low
DisplayPort version
*1
1.1
*1 These menus cannot be initialized with “Monitor Reset”. (Refer to the Installation Manual (on the CD-
ROM)).
*2 Leave the default setting “Off” as it is.
Attention
• If “Sub Pixel Drive” is set to “On”, the screen is not displayed properly.
For information on how to reconfigure, refer to the Installation Manual (on the CD-ROM).
