17
Chapter 2 Settings and Adjustments
Menu
Description
Adjustment range
Brightness To adjust the full screen
brightness as desired
0 to 100%
NOTE
• You can also adjust the brightness by pressing
or
button while the adjustment menu is not displayed. Press
after adjustment.
Contrast
To adjust the contrast of the
image
0 to 100%
NOTE
• In the contrast of 50%, every color gradation is displayed.
• When adjusting the monitor, it is recommended to perform
the brightness adjustment which may not lose the gradation
characteristics, prior to the contrast adjustment. Perform the
contrast adjustment in the following cases.
– When you feel the image is dark even if the brightness is
set to 100%. (Set the contrast to higher than 50%).
– When you feel the image is bright even if the brightness is
set to 0%. (Set the contrast to lower than 50%).
Temperature To select a color
temperature
Off, 5000K, 6500K, 9300K
NOTE
• Setting the value to “Off” presents the natural color of the
panel.
• The values shown in the Kelvin (K) are available only as
reference.
Gain
To adjust red, green, and
blue to a desired color tone
respectively
0 to 100%
Adjust the respective brightness of
red/green/blue to make a desired
color tone. Display an image with
white or gray background for
adjustment.
Attention
• This function does not enable to display every color gradation.
NOTE
• Values shown in percentage are available only as reference.
• When using the <Gain> setting, the <Temperature> setting is
set to “Off”.
• The gain value may change depending on the value of the
color temperature.
Reset
To reset the color settings of the selected FineContrast mode to
the default settings
●
To set/adjust color
(1) Choose <Color> from the Adjustment menu, and press
.
(2) Select a desired function from the <Color> menu, and press
.
The selected function menu appears.
(3) Adjust the selected item with
or
, and press
.
The adjustment is completed.
NOTE
• Using the “ScreenManager Pro for
LCD” allows you to perform the color
adjustment by using the mouse and
keyboard of your PC. The adjusted
status can be registered as a color data
and restore the data later. (Refer to
“Chapter 4 Color Adjustment” on the
User’s Manual for “ScreenManager
Pro for LCD”.)
Summary of Contents for FLEXSCAN S1701-X -
Page 52: ...52 Pb Hg Cd Cr VI PBB PBDE SJ T 11363 2006 SJ T 11363 2006...
Page 53: ......
