background image

PRECAUTIONS

 WARNING

Handle the power cord with care.

• 

Do not place the cord underneath the unit or other heavy objects.

• 

Do not pull on or tie the cord.

If the power cord becomes damaged, stop using it. Use of a damaged cord may 
result in fire or electric shock.

Never touch the plug and power cord if it begins to thunder.

Touching them may result in electric shock.

When attaching an arm stand, please refer to the user's manual of the arm 
stand and install the unit securely.

Not doing so may cause the unit to come unattached, which may result in injury or 
equipment damage. When the unit is dropped, please ask your dealer for advice. 
Do not continue using a damaged unit. Using a damaged unit may result in fire or 
electric shock. When reattaching the tilt stand, please use the same screws and 
tighten them securely.

Do not touch a damaged LCD panel directly with bare hands.

The liquid crystal which leaks from the panel is poisonous if it enters the eyes or 
mouth.
If any part of the skin or body comes in direct contact with the panel, please wash 
thoroughly. If some physical symptoms result, please consult your doctor.

Lamps contain mercury, dispose according to local, state or federal laws.

 CAUTION

Handle with care when carrying the unit.

Disconnect the power cord and cables when moving the unit. Moving the unit with 
the cord attached is dangerous. It may result in injury.

Carry or place the unit according to the correct specified methods.

•  When carrying the unit, grasp and hold firmly as shown in the illustration below.
•  Do not unpack or carry the unit only by a single person, since the large size unit 

is so heavy.

Dropping the unit may result in injury or equipment damage.

Do not block the ventilation slots on the cabinet.

• 

Do not place any objects on the ventilation slots.

• 

Do not install the unit in a closed space.

• 

Do not use the unit laid down or upside down.

Blocking the ventilation slots prevents proper airflow and may result in fire, electric 
shock, or equipment damage.

Do not touch the plug with wet hands.

Doing so may result in electrical shock.

Summary of Contents for FlexScan MX300W

































Reviews: