English
2.
CABLE
CONNECTION
13
2-2. Connecting the Signal Cable
NOTE
•
Be sure that the power switches of both the PC and the monitor are OFF.
1.
Plug the signal cable into the connector at the rear of the monitor
and the other end of the cable into the video connector on the PC.
After connecting, secure the connection with the screw-in fasteners.
Analog Input
Signal Cable
Connector
PC
Signal Cable (MD-C87
enclosed)
Video Output
Connector / D-Sub mini
15 pin
Input Connector
(monitor) / D-Sub mini
15 pin
•
Standard graphics card
•
Power Macintosh G3 (Blue &
White) / Power Mac G4
(VGA)
Signal Cable (MD-C87
enclosed) + Adapter*
Video Output
Connector / D-Sub 15
pin
Input Connector
(monitor) / D-Sub mini
15 pin
•
Macintosh
*Macintosh Adapter (Optional)
Digital Input
Signal Cable
Connector
PC
Signal Cable (FD-C39
enclosed)
Video Output
Connector / DVI
Input Connector
(monitor) / DVI
•
Digital graphics board
•
Power Mac G4 (DVI)
NOTE
•
The monitor is not compatible with a Power Mac G4/G4 Cube ADC (Apple
Display Connector)
Power Cord
