EMC Information
Essential performance of FlexScan L363T-C/L353T-C are to display images and operate functions normally.
CAUTION
The FlexScan L363T-C/L353T-C require special precautions regarding EMC and need to be
installed, put into service and used according to the following information.
Do not use any cables other than the cables that provided or specified by us.
Using other cables may cause the increase of emission or decrease of immunity.
Do not put any portable and mobile RF communications equipment close to the FlexScan L363T-C/
L353T-C. Doing so may affect the FlexScan L363T-C/L353T-C.
The FlexScan L363T-C/L353T-C should not be used adjacent to or stacked with other equipment.
If adjacent or stacked use is necessary, the equipment or system should be observed to verify
normal operation in the configuration in which it will be used.
Guidance and manufacturer’s declaration - electromagnetic emissions
The FlexScan L363T-C/L353T-C are intended for use in the electromagnetic environment specified below.
The customer or the user of the FlexScan L363T-C/L353T-C should assure that it is used in such an
environment.
Emission test
Compliance
Electromagnetic environment - guidance
RF emissions
EN55011
Group 1
The FlexScan L363T-C/L353T-C use RF energy only for its internal
function.
Therefore, its RF emission are very low and are not likely to cause
any interference in nearby electronic equipment.
RF emissions
EN55011
Class B
The FlexScan L363T-C/L353T-C are suitable for use in all
establishments, including domestic establishments and those
directly connected to the public low-voltage power supply network
that supplies buildings used for domestic purposes.
Harmonic emissions
EN61000-3-2
Not applicable
Voltage fluctuations /
flicker emissions
EN61000-3-3
Complies
