English
2.
CABLE
CONNECTION
15
NOTE
•
Whenever finished, turn off the PC and the monitor. Touch operation is effective
until turning off both PC and monitor.
•
Adjust brightness of the screen depending on the brightness of your environment.
Too dark or too bright of a screen can cause eyestrain.
•
Be sure to take adequate rests. A 10-minute rest period each hour is suggested.
•
For the users with gloves, we recommend to use touch panel pointer, “TP1”
(optional). Regarding the installation, please refer to the User’s Manual of TP1.
2-3. Connecting two PCs to the monitor
Two PCs can be connected to the monitor through the DVI and the D-Sub mini 15 pin
connector on the back of the monitor.
Selecting the active input
The Input Signal Selection Button on the control panel can be used to select either Signal
1 or Signal 2 as the active input at any time. Every time the button is pressed, the input
changes. When switching the signal, the kind of the input signal (Signal1 or 2/Analog or
Digital) is displayed for a few seconds on the right top corner of the screen.
SIG.
AUTO
ENT.
Input Signal Selection Button
