●
Rear
17
16
13
14
12
11
10
9
8
7
6
15
10
6. Handle
This handle is used for transportation.
7. Security lock slot
Complies with Kensington’s MicroSaver security system.
8. Lock button
Use this button to remove the monitor from the stand.
9. Headphone jack
Connects to headphones.
10. USB-A connector
(downstream)
Connects to a peripheral USB device (
).
11. Cable holder
Holds the monitor cables.
12. Stand
*1
Adjusts the height and angle (tilt and swivel) of the monitor.
13. Main power switch
Turns the main power on or off. : On, : Off
14. Power connector
Connects the power cord.
15. DisplayPort
connector
Connects to a PC with DisplayPort output.
16. HDMI connector
Connects to a PC with HDMI output.
17. USB-C connector
(upstream)
Connects to a PC with USB-C output. This also transmits the USB signal that is
necessary for using software that requires USB connection.
*1 An optional arm (or optional stand) can be attached by removing the stand section.
10
Chapter 1 Introduction
