Eizo ColorEdge CG242W, User Manual

Page: 7 / 41

1. Introduction
1-. Controls and Functions
14
11
17
16
15
10 12 13
1 2 3 4 5 6 7 8 9
1
Sensor Detects ambient brightness. Auto EcoView function
Adjustment Lock
button This function locks the buttons to retain the status adjusted or set once. ( page 21 )
Input Signal Selection
button Switches input signals for display when two PCs are connected to the monitor. ( page
27 )
Mode button Allows you to switch the FineContrast mode. ( page 16 )
Auto button Performs the function to adjust the screen automatically. (analog input only) ( page 13 )
Enter button Displays the Adjustment menu, determines an item on the menu screen, and
saves values adjusted. (
page 9 )
Control buttons
(Left, Down, Up, Right) Chooses an adjustment item or increases/decreases adjusted values for
advanced adjustments using the Adjustment menu. (
page 9 )
8
Power button Turns the power on or off.
9
Power indicator Indicates monitor’s operation status.
Blue: Operating
Flashing blue (2 times for each): When the timer is set for ColorNavigator,
notifies that a recalibration is required (for CAL mode or EMU mode).
Orange: Power saving Off: Power off
10
Main Power switch Turns the main power on or off.
11
Power connector Connects the power cord.
1
Input signal
connectors
DVI-I Connector x 1 / DisplayPort Connector x 1
1
USB port (Up)
Connects the USB cable to use the software that needs USB connection, or to use
USB Hub function.
1
USB port (Down)
Connects a peripheral USB device.
1
Stand
Used to adjust the height and angle of the monitor screen.
1
Security lock slot
Complies with Kensington’s MicroSaver security system.
1
Cable holder Covers the monitor cables.
*ScreenManager
®
is an EIZO’s nickname of the Adjustment menu.
Adjustment menu
(ScreenManager
® *
)