Key Sequence
Display
Increase/decrease in the signal volume:
The LED will
flash to indicate the desired change in volume.
Increase/decrease in bass/treble levels:
The LED will flash
to indicate the desired change in the bass/treble levels.
Mute:
the unit becomes silent (mute activated)
Loudness:
It reinforces the bass level in terms of the signal volume, assuming a
greater backing at a lower volume and a lesser backing at a higher volume.
Mono/stereo reception:
When activated, this feature allows the FM stations to be received in
stereo. When cleared, this feature only allows for mono reception.
Note: If the control unit's configuration is mono (see Installation Sheet supplied with this kit), the
signal will always be received in mono even if the signal received by the antenna is in stereo.
If the control unit is off, a brief press on the
will gradually turn on the unit
(between 1 and 2 seconds).
When the control unit is off, the LED will be OFF.
ON/OFF key
The LED will display the word “ON”
5
ENG
3. Operating Audio Functions
on
vol 58
BAS+06
MUTE
LD on
STEREO
