1.- None of the functions (except ON/OFF) work unless the remote control is in “on” mode.
2.- Functions pertaining to operating the audio signal only work when “mute” is cancelled.
Once the
®
is connected to the mains, it will remain powered even it is in OFF state.
That means that the OFF state (as indicated in this manual) really means a “standby” state
3.-
kb
sound
select
4.-
5.- The remote control unit exchanges information (transmits and
receives data) by means of the transmission-reception capsule. If
at any time there is a failure in the synchronicity of communication,
the screen will display the symbol. In the event of this
occurring, point the remote control to the transmission-reception
capsule at a straight-line distance of no greater than 5 meters.
6.- The remote control display will
automatically turn off when there has been
no keying activity for more than a few
seconds, ensuring more efficient battery
usage. To view the display information at
any time, point the remote control to the
transmission-reception capsule and press
the key.
A short BEEP sound signal indicates that the data was received
7.- To illustrate that an
operation requires holding down
a key on the remote control for a
specific amount of time, the
symbol will appear in the manual
next to the key. The screen will
display the symbol
BIP
4
5m
The
®
will turn on with the audio
and station frequency
settings saved as “ideal”
mode settings (see chapters
5 and 6) when the unit is
connected to a power
supply.
When switched off and on
while connected to the
power supply, the audio and
station frequency settings
will be as when the unit was
switched off with the remote
control ON/OFF key
kb
sound
select
2. General Operating Notes
F
F
