background image

2. Electrical and functional specification

3. Operation

15Vdc

Bluetooth ID

0521

left speaker output

right speaker output

external

audio input

(jack 3,5 mm)

led for

signaling

operating key

A
B

D
E

F
G

Power:

 the Module is powered from an external power supply 

unit. Any 15Vdc power supply unit may be used. 

Audio output:

 the Module provides a stereo audio output 

consisting in left and right channels. The audio power supplied is:

External audio input:

 the Module includes an external audio 

input (3,5mm jack). When the user inserts a jack the audio 
output switches to the signal from the external audio source 
(red led) and overrides the Bluetooth mode.

Operating Key:

 the Module is provided with a key for 

operating the Bluetooth mode.

Led for signaling:

 the led color for signaling the status of 

the Module is as follows:

Blue flashing led = waiting for pairing and connecting 
with the Bluetooth device

Blue led = Module is connected to the Bluetooth device

Red led = An external audio input has been inserted

Before commencing any pairing we recommend that 
you check that your Bluetooth device has A2DP / AVRC 
profiles. In addition, the pairing process can vary between 
manufacturers. Please read carefully your Bluetooth device 
user manual beforehand. For a successful pairing make 
sure the Bluetooth device is close to the Module when 
performing this task.

POWER SUPPLY

SPEAKER

4 ohm

8 ohm

16 ohm

15V/0,53A

2,5Wrms

1,5Wrms

1Wrms

15V/0,8A

5Wrms

2,5Wrms

1,5Wrms

Bluetooth

KINGBT-0521

    

Connected

KINGBT-0414 

not connected

KINGBT-0707 

not connected

Bluetooth ID:

 each Module 

is identified as KINGBT-
XXXX where XXXX is a serial 
number which permits the 
user to identify different 
Modules that can co-exist 
in the same installation. An 
adhesive label is provided 
with each Module to be fixed 
on the face cover. In this way, 
the user can choose from his 
Bluetooth device the Module 
with which he wishes to 
stream his music. 

3.1.

 To turn ON / OFF the Module press the operating key for 4”.

0521

4”

Bluetooth Connect

0521

4”

Bluetooth Disconnect

Bluetooth Connect

Bluetooth Disconnect

ENG

In-Wall 

Bluetooth

®

 Audio Receiver

Installation Manual 

Summary of Contents for 52691






Reviews: