![background image](http://html.mh-extra.com/html/arc/lycr-1500/lycr-1500_user-manual_2963264001.webp)
USER MANUAL
Model LYCR-1500 Receiver
FEATURES:
●
No wiring, easy operation, just plug and use.
●
67 million codes, self program function receiver.
●
Receiver has 6 memory settings, no memory loss forever.
●
Red LED indicator for POWER ON and PROGRAMMING SETTINGS.
●
Transmitter with 16 receivers control on paged channel.
INSTALLATION:
Controller (Receiver)
●
Just plug-in receiver into wall outlet
●
Indicator on receiver should light on.
●
Connect lamp plug into receiver
Remote control (Transmitter)
●
Remote control till 30M in open area
OPERATION
:
ON/OFF RECEIVER
* Press transmitter button ‘ON’ to switch on.
* Press transmitter button ‘OFF’ to switch off.
HOW TO LINK CODE:
*
To start, program your transmitter with the receiver.
* Receiver plugged on power
* Bring the transmitter near the receiver, push the self program button on receiver once
* Receiver led will blink slowly, press transmitter selected
“ON”
button
* Receiver connected lamp will blink twice, code is confirmed and led stops blinking.
* Remember the transmitter button you selected for the programmed receiver.
* Transmitter and Receiver codes are auto programmed.
TO CHANGE OR DELETE CODE :
INDIVIDUAL DELETE -
* Push the self program button once, led will blink slowly
* Press selected
“OFF”
button on transmitter, programmed memory is deleted.
* Receiver connected lamp will blink twice for confirmation.
* Repeat step for re-setting
ALL MEMORY DELETE -
* Push the self program button till the LED blinking continuously
* Release and push again once.