GB
- 16 -
Important!
When using equipment, a few safety precautions
must be observed to avoid injuries and damage.
Please read the complete operating manual with
due care. Keep this manual in a safe place, so
that the information is available at all times. If
you give the equipment to any other person, give
them these operating instructions as well.
We accept no liability for damage or accidents
which arise due to non-observance of these inst-
ructions and the safety information.
1. Safety information
Please refer to the booklet included in delivery for
the safety instructions.
CAUTION!
Read all safety regulations and instructions.
Any errors made in following the safety regula-
tions and instructions may result in an electric
shock,
fi
re and/or serious injury.
Keep all safety regulations and instructions
in a safe place for future use.
2. Layout and items supplied
2.1 Layout (Fig. 1)
1. Spindle lock
2. On/O
ff
switch
3. Additional anti-vibration handle
4. Guard
5. Face
spanner
2.2 Items supplied
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Important!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or su
ff
ocating!
•
Additional anti-vibration handle
•
Guard
•
Original operating instructions
•
Safety instructions
3. Proper use
The angle grinder is designed for grinding metal
and stone when using the appropriate grinding
wheel and guard.
Caution!
To cut metal and stone the grinder/san-
der may only be used when the guard (available
as an accessory) is mounted.
The machine is to be used only for its prescribed
purpose. Any other use is deemed to be a case
of misuse. The user / operator and not the manu-
facturer will be liable for any damage or injuries of
any kind caused as a result of this.
4. Technical data
Mains voltage: ............................... 230 V ~ 50 Hz
Power input: .............................................. 750 W
Rated speed: ....................................10,000 min
-1
Max. wheel diameter: ............................. 125 mm
Protection class: ...........................................II /
Weight: .......................................................2,2 kg
Sound and vibration
Sound and vibration values were measured in
accordance with EN 60745.
L
pA
sound pressure level ........................ 89 dB(A)
K
pA
uncertainty .............................................3 dB
L
WA
sound power level ........................ 100 dB(A)
K
WA
uncertainty .............................................3 dB
Wear ear-mu
ff
s.
The impact of noise can cause damage to hea-
ring.
Total vibration values (vector sum of three direc-
tions) determined in accordance with EN 60745.
Anl_TP_AG_1275_SPK7.indb 16
Anl_TP_AG_1275_SPK7.indb 16
19.06.13 16:09
19.06.13 16:09
Summary of Contents for TP-AG 1275
Page 12: ...D 12 Anl_TP_AG_1275_SPK7 indb 12 Anl_TP_AG_1275_SPK7 indb 12 19 06 13 16 09 19 06 13 16 09...
Page 60: ...60 Anl_TP_AG_1275_SPK7 indb 60 Anl_TP_AG_1275_SPK7 indb 60 19 06 13 16 09 19 06 13 16 09...
Page 61: ...61 Anl_TP_AG_1275_SPK7 indb 61 Anl_TP_AG_1275_SPK7 indb 61 19 06 13 16 09 19 06 13 16 09...