GB
- 30 -
that the saw takes a little time to slow down
and stop.
Additional safety instructions for all saws
with splitter
a) Choose the appropriate splitter for the
saw blade used.
The splitter must be thicker
than the basic blade thickness of the saw bla-
de, but thinner than the width of its teeth.
b) Adjust the splitter as described in this
operating manual.
Incorrect strength, po-
sition and alignment could lead to ine
ffi
cient
recoil prevention.
c) Always use the splitter except for plunge
cuts.
Re-attach the splitter after the plunge
cut. The splitter is disruptive when making
plunge cuts, and can lead to a recoil.
d) In order for the splitter to function, it must
be situated in the sawing gap.
For shorter
cuts the splitter is ine
ff
ective for recoil preven-
tion.
e) Do not operate the saw if the splitter is
bent.
Even a very small fault can cause the
guard hood to close more slowly.
Do not lose these safety instructions
2. Layout and items supplied
2.1 Layout (Fig. 1a/1b)
1. Handle
2. ON/OFF switch
3. Locking button for ON/OFF switch
4. Locking lever for cutting depth setting
5. Power cable
6. Soleplate
7. Locking lever for miter setting
8. Locking screw for parallel stop
9. Scale for miter angle
10. Additional handle
11. Guard hood
12. Saw blade
13. Saw blade wrench
14. Connection for sawdust extractor
15. Lever for opening the swing guard hood
16. Parallel stop
17. Screw for securing the saw blade
18. Flange
19. Swing guard hood
20. Splitter
2.2 Items supplied
Please check that the article is complete as
speci
fi
ed in the scope of delivery. If parts are
missing, please contact our service center or the
sales outlet where you made bought the product
within the maximum days indicated by the con-
sumer protection laws of your country and upon
presentation of a valid bill of purchase. Also, refer
to the warranty table in the service information at
the end of the operating instructions.
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or su
ff
ocating!
•
Hand-held Circular Saw
•
Saw blade
•
Saw blade wrench
•
Hexagon key
•
Original operating instructions
3. Proper use
The hand-held circular saw is designed for sa-
wing straight cuts in wood, wood-type materials
and plastics.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
Anl_SA_TC_CS_1401_SPK8.indb 30
Anl_SA_TC_CS_1401_SPK8.indb 30
03.04.2019 07:32:31
03.04.2019 07:32:31
