GB
- 28 -
circumstances.
f) Wear suitable work clothes. Do not wear
loose clothing or jewellery. Keep hair, clo-
thes and gloves away from moving parts.
Loose clothing, jewellery or long hair can get
trapped in moving parts.
g) If vacuuming devices and draining de-
vices can be
fi
tted, make sure that these
are correctly attached and correctly used.
The use of a dust extraction system can redu-
ce the danger posed by dust.
4. Usage and treatment of the electric tool
a) Do not overload the appliance. Use the
correct tool for your work.
You will be able
to work better and more safely within the gi-
ven performance boundaries.
b) Do not use an electric tool with a defec-
tive switch.
An electric tool that cannot be
switched on or o
ff
is dangerous and must be
repaired.
c) Pull the plug out of the socket and/or
remove the battery before making any ad-
justments to the appliance, changing ac-
cessories or put the appliance down.
This
safety measure prevents starting the electric
tool unintentionally.
d) Keep unused electric tools out of the
reach of children. Do not allow people
who are not familiar with the appliance or
who have not read these instructions to
use the appliance.
Electric tools are dange-
rous if they are used by inexperienced people.
e) Clean your electric tool carefully. Check
whether moving parts are functioning
properly and not jamming, whether parts
are broken or damaged enough that the
functioning of this electric tool is a
ff
ec-
ted. Damaged parts must be repaired be-
fore using the appliance.
Many accidents
are caused by badly maintained electric tools.
f) Keep your cutting tools sharp and clean.
Carefully maintained cutting tools with sharp
cutting edges will jam less and are easier to
control.
g) Make sure to use electric tools, accesso-
ries, spare parts, etc. in accordance with
these instructions. Take the conditions
in your work area and the job to perform
into account.
Using electric tools for any
purpose other than the one for which they are
intended can lead to dangerous situations.
5. Service
a) Have your electric tool repaired only by
trained personnel and/or the authorized
service agent, using only genuine spare
parts
. This will ensure that your electric tool
remains safe to use.
Special safety information
Danger:
a) Do not reach into the sawing area or
touch the saw blade. Hold the additional
handle or the motor casing with your
other hand.
If you hold the circular saw in
both hands, the saw blade cannot injure
them.
b) Do not reach under the workpiece.
The
guard hood cannot protect you from the saw
blade under the workpiece.
c) Adjust the cutting depth to the thickness
of the workpiece.
Less than one full tooth
height should be visible under the workpiece.
d) Never hold the workpiece you wish to
saw in your hand or on your leg. Secure
the workpiece on a sturdy surface.
It is im-
portant that you secure the workpiece well to
minimize the danger of body contact, the saw
blade jamming or loss of control.
e) Hold the appliance only by the insulated
handles when carrying out work during
which the cutting tool could strike conce-
aled power cables or its own cable.
Con-
tact with a live cable will also make the metal
parts of the appliance live and will cause an
electric shock.
f) Always use a stop or a straight edge
when carrying out longitudinal cuts.
This
will improve your cutting accuracy and reduce
the possibility of the saw blade jamming.
g) Always use saw blades of the correct
size and with a suitable mounting hole
(diamond-shaped or round).
Saw blades
that do not match the mounting parts of the
saw will not rotate truly and will result in a loss
of control.
h) Never use damaged or incorrect saw
blade washers or screws.
The saw blade
washers and screws have been specially
designed for your saw to ensure perfect per-
formance and operational safety.
Anl_SA_TC_CS_1401_SPK8.indb 28
Anl_SA_TC_CS_1401_SPK8.indb 28
03.04.2019 07:32:31
03.04.2019 07:32:31
