29
6.6.2 Cutting (Fig. 12)
Caution: Use the safety device for abrasive
cutting
(available as accessory, see 8.4)
When you use the right-angle grinder for cutting
purposes, avoid tilting it in the cutting plane. The
cutting wheel must have a clean cutting edge.
A diamond cutting wheel is best used to cut hard
stone.
It is prohibited to use the machine on
asbestos materials!
Never use a cutting wheel for rough grinding.
7. Replacing the power cable
If the power cable for this equipment is damaged, it
must be replaced by the manufacturer or its after-
sales service or similarly trained personnel to avoid
danger.
8. Cleaning and maintenance
Always pull out the mains power plug before starting
any cleaning work.
8.1 Cleaning
n
Keep all safety devices, air vents and the motor
housing free of dirt and dust as far as possible.
Wipe the equipment with a clean cloth or blow it
with compressed air at low pressure.
n
We recommend that you clean the device
immediately each time you have finished using it.
n
Clean the equipment regularly with a moist cloth
and some soft soap. Do not use cleaning agents
or solvents; these could attack the plastic parts
of the equipment. Ensure that no water can seep
into the device.
8.2 Carbon brushes
In case of excessive sparking, have the carbon
brushes checked only by a qualified electrician.
Important! The carbon brushes should not be rep
laced by anyone but a qualified electrician.
8.3 Maintenance
There are no parts inside the equipment which
require additional maintenance.
9. Disposal and recycling
The unit is supplied in packaging to prevent its being
damaged in transit. This packaging is raw material
and can therefore be reused or can be returned to
the raw material system.
The unit and its accessories are made of various
types of material, such as metal and plastic.
Defective components must be disposed of as
special waste. Ask your dealer or your local council.
10. Storage
Store the equipment and accessories out of children’s
reach in a dark and dry place at above freezing
temperature. The ideal storage temperature is
between 5 and 30 °C. Store the electric tool in its
original packaging
Anleitung_RT_AG_115_SPK8a__ 24.01.13 10:13 Seite 29
Summary of Contents for RT-AG 115
Page 2: ...2 1 2 1 4 3 C B A 2 3 5 Anleitung_RT_AG_115_SPK8a__ 24 01 13 10 12 Seite 2...
Page 3: ...3 7 8 1 4 a c b a b 3 4 5 6 b a 4 3 a 5 2 Anleitung_RT_AG_115_SPK8a__ 24 01 13 10 12 Seite 3...
Page 4: ...4 9 10 11 12 a b a b Anleitung_RT_AG_115_SPK8a__ 24 01 13 10 12 Seite 4...
Page 40: ...EH 01 2013 01 Anleitung_RT_AG_115_SPK8a__ 24 01 13 10 13 Seite 40...
