GB
- 17 -
4. Technical data
Motor power supply: ................................... 7.2 V
Idling speed n
0
.......................... 5500-26000 rpm
Clamping range ...............................1.6 - 3.2 mm
Attachments Ø max. ................................. 32 mm
Attachment length max. ........................... 18 mm
Spindle length max. .................................. 50 mm
Battery charge voltage: .............................. 9.6 V
Battery charge current: ................................ 1.6 A
Charging unit
supply voltage: ..................100-240 V ~ 50-60 Hz
Charging time: ................................................ 1 h
Battery type: ...................................... Lithium-ion
Weight .......................................................0.3 kg
Danger!
Sound and vibration
Sound and vibration values were measured in
accordance with EN 60745.
L
pA
sound pressure level ........................ 60 dB(A)
K
pA
uncertainty .............................................3 dB
L
WA
sound power level .......................... 71 dB(A)
K
WA
uncertainty .............................................3 dB
Wear ear-mu
ff
s.
The impact of noise can cause damage to hea-
ring.
Total vibration values (vector sum of three direc-
tions) determined in accordance with EN 60745.
Vibration emission value a
h
≤
2.5 m/s
2
K uncertainty = 1.5 m/s
2
The speci
fi
ed vibration value was established in
accordance with a standardized testing method. It
may change according to how the electric equip-
ment is used and may exceed the speci
fi
ed value
in exceptional circumstances.
The speci
fi
ed vibration value can be used to
compare the equipment with other electric power
tools.
The speci
fi
ed vibration value can be used for initi-
al assessment of a harmful e
ff
ect.
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
•
Wear protective gloves.
Caution!
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain resi-
dual risks cannot be rules out. The following
hazards may arise in connection with the
equipment’s construction and layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear protec-
tion is used.
3. Health damage caused by hand-arm vib-
rations if the equipment is used over a pro-
longed period or is not properly guided and
maintained.
5. Before using the equipment
Charge the battery only with the charging unit
supplied.
5.1 Charging the battery (Fig. 1)
The battery is protected from exhaustive dischar-
ge. An integrated protective circuit automatically
switches o
ff
the equipment when the battery is
fl
at.
Warning!
Do not actuate the On/O
ff
switch any
more if the protective circuit has tripped. This may
damage the battery.
1. Check that your mains voltage is the same as
that marked on the rating plate.
2. Insert the plug of the charging station (4) into
the socket outlet.
3. Now insert the device into the charging stati-
on (4).
Anl_TE_MT_7_2_Li_SPK9.indb 17
Anl_TE_MT_7_2_Li_SPK9.indb 17
14.04.2020 10:34:50
14.04.2020 10:34:50
