GB
- 22 -
3. Proper use
The double-wheel grinder is a combination tool
for the grinding and polishing of metals, plastics
and other materials using the appropriate grinding
wheels.
The
fl
exible shaft is designed for the grinding, de-
burring, polishing, cutting and cleaning of wood,
metal and plastic in model-making, in workshops
and in the home. Use the tool and its accessories
only for the applications described.
The machine is allowed to be used only for its
intended purpose! Even when the equipment is
used as prescribed it is still impossible to elimina-
te certain residual risk factors. The following ha-
zards may arise in connection with the machine‘s
construction and layout:
•
Contact with the grinding wheel where it is not
covered.
•
Catapulting of parts from out of damaged
grinding wheels.
•
Catapulting of workpieces and parts of work-
pieces.
•
Damage to hearing if essential ear-muffs are
not used.
The equipment is allowed to be used only for its
prescribed purpose. Any other use is deemed to
be a case of misuse. The user/operator and not
the manufacturer will be liable for any damage or
injuries of any kind resulting from such misuse.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
equipment is used in commercial, trade or indust-
rial businesses or for equivalent purposes.
4. Technical data
Mains voltage: ....................... 220 -240 V ~ 50 Hz
Power consumption: S1 120 W | S2 5 min 150 W
Idle speed n
max
: ....................................9900 min
-1
Max. wheel diameter: ............................... 79 mm
Min. wheel diameter: ................................ 50 mm
Wheel diameter: ....................................... 75 mm
Wheel thickness: ...................................... 20 mm
Wheel hole diameter: ............................... 10 mm
Max. peripheral speed: ...........................38,9 m/s
Protection Class ............................................ II/
쓑
Weight: ......................................... approx. 3.0 kg
Load factor:
A load factor of S2 5 min (intermittent periodic
duty) means that you may operate the motor
continuously at its nominal power level (150 W)
for no longer than the time stipulated on the spe-
ci
fi
cations label (5 minutes ON period). If you fail
to observe this time limit the motor will overheat.
During the OFF period the motor will cool again to
its starting temperature.
Danger!
Noise
The noise emission values were measured in ac-
cordance with EN 62841.
Operation
L
pA
sound pressure level ..................... 82.8 dB(A)
K
pA
uncertainty ........................................ 3 dB(A)
L
WA
sound power level ....................... 95.8 dB(A)
K
WA
uncertainty ........................................ 3 dB(A)
Wear ear-mu
ff
s.
The impact of noise can cause damage to hea-
ring.
The stated noise emission values were measured
in accordance with a set of standardized criteria
and can be used to compare one power tool with
another.
The stated noise emission values can also be
used to make an initial assessment of exposure.
Warning:
The noise emission levels may vary from the level
speci
fi
ed during actual use, depending on the
way in which the power tool is used, especially
the type of workpiece it is used for.
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
Anl_TC-XG_75_Kit_SPK9.indb 22
Anl_TC-XG_75_Kit_SPK9.indb 22
13.07.2020 13:05:44
13.07.2020 13:05:44
