Important!
When using equipment, a few safety precautions
must be observed to avoid injuries and damage.
Please read the complete operating manual with due
care. Keep this manual in a safe place, so that the
information is available at all times. If you give the
equipment to any other person, give them these
operating instructions as well.
We accept no liability for damage or accidents which
arise due to non-observance of these instructions
and the safety information.
1. Safety rules
The corresponding safety information can be
found in the enclosed booklet.
2. Description of the machine
(Fig. 1 and 2)
1 Handle
2 Scale
3 Depth
stop
4 Motor
housing
5 Mains
cable
6 ON/OFF
switch
7 Speed
selector
8 Thumscrew
9 Guide
bush
10 Trammel point
11 Routing base
12 Spindle catch
13 Parallel stop
14 Spanner
15 Clamping handle
16 Extractor socket
3. Technical data
Voltage
230 V - 50 Hz
Power consumption
1020 W
Idle speed
16.000 - 30.000 rpm
Stroke/routing depth
40 mm
Collet
Ø 8 and Ø 6 mm
For moulding cutters
max. Ø 36,5 mm
Safety insulated
II /
쓑
Weight
3.8 kg
Sound pressure level L
pA
89,5 dB(A)
Sound power level L
WA
100,5 dB(A)
Vibration a
hv
3,905 m/s
2
4.
Proper use
The router is ideal for the processing of wood and
plastic, for the removal of knots, for the cutting of
grooves and recesses, and for the copying of curves
and lettering etc.
It is prohibited to use the router to process metal,
stone and similar materials.
The machine is to be used only for its intended pur-
pose.
Any use beyond its intended purpose is a case of
mis-use. Liability for damage or injury resulting from
such a case of mis-use shall rest with the user or
operator and not with the manufacturer.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
5. Prior to operation
Before starting the router, make sure that all its
guards and safety devices are properly fitted.
Before connecting up the router, make sure that
your power supply complies with the data on the
machineʼs rating plate.
6. Assembly and operation
Important.
Pull out the power plug before carrying out any
assembly and adjustment work.
6.1 Extraction port assembly (Fig. 3/4)
Important. For health and safety reasons it is
imperative that you use a dust extractor.
Secure the extraction port (16) to the routing shoe
(11) using the two countersunk screws (a).
9
GB
Anl BOF 850-1 E_SPK1:_ 21.12.2006 9:00 Uhr Seite 9
