13
WWW.EILERSEN.COM
entry screen will appear. Please note the layout of the data entry screen may vary slightly
depending on the actual parameter to be changed. The data entry screen could look as
shown:
The actual parameter changed is indicated in the upper left part of the display. The current
parameter value and the currently entered value is shown in the upper right part of the dis-
play. The currently entered value is also shown in the middle of the display in large font.
The keys can be used as follows:
F
Abort the entry without change of parameter.
Increase the value of the digit currently being entered (digit to the right).
Decrease the value of the digit currently being entered (digit to the right).
Accept the entered value as the new desired value.
Clr
Delete rightmost digit and moves all remaining digits one position to the right.
T
Move digits one position to the left and inserts a zero on the rightmost position.
This new digit can subsequently be changed using and .
>0<
Clears all entered digits setting them to zero as if the data entry screen has just
been entered.
When entering a value the digits are entered left to right. This means that leftmost digit is
entered first. The active digit is changed by and . When the correct value is entered
press
T
to advance to the next digit. If an error is made, press
Clr
to return to the previous
digit. When the complete value is entered press
to accept it. To abort without any chang-
es press
F
.
Example - Changing maximum weight from 10.000 to 10.090:
The screen shown above appears once change of maximum weight is requested from the
SETUP WEIGHING
screen by moving the cursor using and
so the “Maximum” we
ight
parameter is selected and then pressing
.
In
order to change the “Maximum” weight parameter to 10.090 perform the fo
llowing:
Press once until
”
. 1”
is shown in the display.
T
Press three times until
” 1.000”
is shown in the display.
Press once until
” 1.009”
is shown in the display.
T
Press once until
” 10.090”
is shown in the display.
Press to accept
” 10.090”
as the new desired value.
